Dust Suppression Solutions

Our complete range of dust monitoring and suppression solutions will help you to reduce downtime, enjoy better relations with your neighbours, comply with ever tightening workplace and environmental regulations, ensure a longer operational life for your production equipment and have a healthier more productive workforce.

 

 

Conveyors & Crushers

Dust can escape when dry material is conveyed, crushed or screened. There are a number of  local dust suppression measures that you can employ to reduce fugitive dust emissions.

Water based solutions such as high and low pressure fogging systems at each location where dust escapes the process.

Foam based solutions require minimal application points in the process to ensure effective dust suppression throughout the entire down stream production process

Containment solutions combined with fogging control the airflow to effectively clean the dust laden air escaping from transfer points. These containment systems are bespoke, designed specifically to suit each application.

 

Haul Road dust control

The transport of material from the mine or quarry face to the primary crushing or screening plant by haulage vehicles can also contribute to dust emissions.

Traditional short term haul road dust suppression tends to be water deployed from a bowser. The water suppresses the dust for a short period of time until the water has evaporated. Once this happens, dust clouds begin to rise. The haul road is further dried by the crushing action of the dumper and loading shovel tyres and exhausts.

More long term solutions are available using wetting or binding agents to ensure medium to long term dust suppression of the haul road.

Wide area dust control

Material stock piles, block yards, mobile plant, mine and quarry roads can all be a source of fugitive dust emissions

Waterbased solutions can be employed to suppress wide area dust emmissions. Dust control rain guns can cover large areas and effectively suppress dust with rain. Smaller sprinkler systems can be used to cover smaller areas. Wetting and binding additives can reduce dust escaping from stockpiles by effectively sealing the outer surface of the stock pile.

 

Waste transfer stations

During the waste recycling process dust can be produced by screening and shredding waste material.

The dust produced during this process can reduce visibility and can be a hazard to both staff and machinery.

Water based solutions comprising either high pressure nozzle fogging systems or low pressure rotary atomising systems  can be effective in controlling dust emanating from this type of operation.

 

PCPgroup design dust control solutions that are a combination of containment and suppression.

For bulk, coal handling, mining, mineral and aggregate production, where excessive wetting of the conveyed material would cause problems, our foam dust suppression system is the answer by using minimal quantities of water to effectively suppress dust throughout the whole production process. Only 2 litres of water is used per tonne of material being conveyed.

Our rotary atomisers provide a significant dust suppression for waste recycling facilities and can be deployed rapidly.

Where a rotary atomiser solution is not an option and or a larger area needs to be covered, the high pressure fogging line provides an effective and easily deployed, fence line dust suppression system.

We can also utilise our range of binding and wetting agents for longer term dust suppression combined with an expansive range of rain guns and sprinklers.

To arrange a free site survey and quotation

call us now on +353 45 863220